--- /dev/null
+[ -f ~/.profile ] && source ~/.profile
# User dependent .bashrc file
# If not running interactively, don't do anything
-[[ "$-" != *i* ]] && return
+[[ -z "$PS1" ]] && return
+
+#[ -f /etc/bash ] && source /etc/bash;
# Load settings
for file in ${HOME}/.config/bash/rc/*; do
# Enable tab completion for `g` by marking it as an alias for `git`
if type _git &> /dev/null; then
- complete -o default -o nospace -F _git g;
+ complete -o default -o nospace -F _git g;
fi;
# Add tab completion for SSH hostnames based on ~/.ssh/config, ignoring wildcards
+++ /dev/null
-# bash/zsh git prompt support
-#
-# Copyright (C) 2006,2007 Shawn O. Pearce <spearce@spearce.org>
-# Distributed under the GNU General Public License, version 2.0.
-#
-# This script allows you to see repository status in your prompt.
-#
-# To enable:
-#
-# 1) Copy this file to somewhere (e.g. ~/.git-prompt.sh).
-# 2) Add the following line to your .bashrc/.zshrc:
-# source ~/.git-prompt.sh
-# 3a) Change your PS1 to call __git_ps1 as
-# command-substitution:
-# Bash: PS1='[\u@\h \W$(__git_ps1 " (%s)")]\$ '
-# ZSH: setopt PROMPT_SUBST ; PS1='[%n@%m %c$(__git_ps1 " (%s)")]\$ '
-# the optional argument will be used as format string.
-# 3b) Alternatively, for a slightly faster prompt, __git_ps1 can
-# be used for PROMPT_COMMAND in Bash or for precmd() in Zsh
-# with two parameters, <pre> and <post>, which are strings
-# you would put in $PS1 before and after the status string
-# generated by the git-prompt machinery. e.g.
-# Bash: PROMPT_COMMAND='__git_ps1 "\u@\h:\w" "\\\$ "'
-# will show username, at-sign, host, colon, cwd, then
-# various status string, followed by dollar and SP, as
-# your prompt.
-# ZSH: precmd () { __git_ps1 "%n" ":%~$ " "|%s" }
-# will show username, pipe, then various status string,
-# followed by colon, cwd, dollar and SP, as your prompt.
-# Optionally, you can supply a third argument with a printf
-# format string to finetune the output of the branch status
-#
-# The repository status will be displayed only if you are currently in a
-# git repository. The %s token is the placeholder for the shown status.
-#
-# The prompt status always includes the current branch name.
-#
-# In addition, if you set GIT_PS1_SHOWDIRTYSTATE to a nonempty value,
-# unstaged (*) and staged (+) changes will be shown next to the branch
-# name. You can configure this per-repository with the
-# bash.showDirtyState variable, which defaults to true once
-# GIT_PS1_SHOWDIRTYSTATE is enabled.
-#
-# You can also see if currently something is stashed, by setting
-# GIT_PS1_SHOWSTASHSTATE to a nonempty value. If something is stashed,
-# then a '$' will be shown next to the branch name.
-#
-# If you would like to see if there're untracked files, then you can set
-# GIT_PS1_SHOWUNTRACKEDFILES to a nonempty value. If there're untracked
-# files, then a '%' will be shown next to the branch name. You can
-# configure this per-repository with the bash.showUntrackedFiles
-# variable, which defaults to true once GIT_PS1_SHOWUNTRACKEDFILES is
-# enabled.
-#
-# If you would like to see the difference between HEAD and its upstream,
-# set GIT_PS1_SHOWUPSTREAM="auto". A "<" indicates you are behind, ">"
-# indicates you are ahead, "<>" indicates you have diverged and "="
-# indicates that there is no difference. You can further control
-# behaviour by setting GIT_PS1_SHOWUPSTREAM to a space-separated list
-# of values:
-#
-# verbose show number of commits ahead/behind (+/-) upstream
-# name if verbose, then also show the upstream abbrev name
-# legacy don't use the '--count' option available in recent
-# versions of git-rev-list
-# git always compare HEAD to @{upstream}
-# svn always compare HEAD to your SVN upstream
-#
-# You can change the separator between the branch name and the above
-# state symbols by setting GIT_PS1_STATESEPARATOR. The default separator
-# is SP.
-#
-# By default, __git_ps1 will compare HEAD to your SVN upstream if it can
-# find one, or @{upstream} otherwise. Once you have set
-# GIT_PS1_SHOWUPSTREAM, you can override it on a per-repository basis by
-# setting the bash.showUpstream config variable.
-#
-# If you would like to see more information about the identity of
-# commits checked out as a detached HEAD, set GIT_PS1_DESCRIBE_STYLE
-# to one of these values:
-#
-# contains relative to newer annotated tag (v1.6.3.2~35)
-# branch relative to newer tag or branch (master~4)
-# describe relative to older annotated tag (v1.6.3.1-13-gdd42c2f)
-# default exactly matching tag
-#
-# If you would like a colored hint about the current dirty state, set
-# GIT_PS1_SHOWCOLORHINTS to a nonempty value. The colors are based on
-# the colored output of "git status -sb" and are available only when
-# using __git_ps1 for PROMPT_COMMAND or precmd.
-#
-# If you would like __git_ps1 to do nothing in the case when the current
-# directory is set up to be ignored by git, then set
-# GIT_PS1_HIDE_IF_PWD_IGNORED to a nonempty value. Override this on the
-# repository level by setting bash.hideIfPwdIgnored to "false".
-
-# check whether printf supports -v
-__git_printf_supports_v=
-printf -v __git_printf_supports_v -- '%s' yes >/dev/null 2>&1
-
-# stores the divergence from upstream in $p
-# used by GIT_PS1_SHOWUPSTREAM
-__git_ps1_show_upstream ()
-{
- local key value
- local svn_remote svn_url_pattern count n
- local upstream=git legacy="" verbose="" name=""
-
- svn_remote=()
- # get some config options from git-config
- local output="$(git config -z --get-regexp '^(svn-remote\..*\.url|bash\.showupstream)$' 2>/dev/null | tr '\0\n' '\n ')"
- while read -r key value; do
- case "$key" in
- bash.showupstream)
- GIT_PS1_SHOWUPSTREAM="$value"
- if [[ -z "${GIT_PS1_SHOWUPSTREAM}" ]]; then
- p=""
- return
- fi
- ;;
- svn-remote.*.url)
- svn_remote[$((${#svn_remote[@]} + 1))]="$value"
- svn_url_pattern="$svn_url_pattern\\|$value"
- upstream=svn+git # default upstream is SVN if available, else git
- ;;
- esac
- done <<< "$output"
-
- # parse configuration values
- for option in ${GIT_PS1_SHOWUPSTREAM}; do
- case "$option" in
- git|svn) upstream="$option" ;;
- verbose) verbose=1 ;;
- legacy) legacy=1 ;;
- name) name=1 ;;
- esac
- done
-
- # Find our upstream
- case "$upstream" in
- git) upstream="@{upstream}" ;;
- svn*)
- # get the upstream from the "git-svn-id: ..." in a commit message
- # (git-svn uses essentially the same procedure internally)
- local -a svn_upstream
- svn_upstream=($(git log --first-parent -1 \
- --grep="^git-svn-id: \(${svn_url_pattern#??}\)" 2>/dev/null))
- if [[ 0 -ne ${#svn_upstream[@]} ]]; then
- svn_upstream=${svn_upstream[${#svn_upstream[@]} - 2]}
- svn_upstream=${svn_upstream%@*}
- local n_stop="${#svn_remote[@]}"
- for ((n=1; n <= n_stop; n++)); do
- svn_upstream=${svn_upstream#${svn_remote[$n]}}
- done
-
- if [[ -z "$svn_upstream" ]]; then
- # default branch name for checkouts with no layout:
- upstream=${GIT_SVN_ID:-git-svn}
- else
- upstream=${svn_upstream#/}
- fi
- elif [[ "svn+git" = "$upstream" ]]; then
- upstream="@{upstream}"
- fi
- ;;
- esac
-
- # Find how many commits we are ahead/behind our upstream
- if [[ -z "$legacy" ]]; then
- count="$(git rev-list --count --left-right \
- "$upstream"...HEAD 2>/dev/null)"
- else
- # produce equivalent output to --count for older versions of git
- local commits
- if commits="$(git rev-list --left-right "$upstream"...HEAD 2>/dev/null)"
- then
- local commit behind=0 ahead=0
- for commit in $commits
- do
- case "$commit" in
- "<"*) ((behind++)) ;;
- *) ((ahead++)) ;;
- esac
- done
- count="$behind $ahead"
- else
- count=""
- fi
- fi
-
- # calculate the result
- if [[ -z "$verbose" ]]; then
- case "$count" in
- "") # no upstream
- p="" ;;
- "0 0") # equal to upstream
- p="=" ;;
- "0 "*) # ahead of upstream
- p=">" ;;
- *" 0") # behind upstream
- p="<" ;;
- *) # diverged from upstream
- p="<>" ;;
- esac
- else
- case "$count" in
- "") # no upstream
- p="" ;;
- "0 0") # equal to upstream
- p=" u=" ;;
- "0 "*) # ahead of upstream
- p=" u+${count#0 }" ;;
- *" 0") # behind upstream
- p=" u-${count% 0}" ;;
- *) # diverged from upstream
- p=" u+${count#* }-${count% *}" ;;
- esac
- if [[ -n "$count" && -n "$name" ]]; then
- __git_ps1_upstream_name=$(git rev-parse \
- --abbrev-ref "$upstream" 2>/dev/null)
- if [ $pcmode = yes ] && [ $ps1_expanded = yes ]; then
- p="$p \${__git_ps1_upstream_name}"
- else
- p="$p ${__git_ps1_upstream_name}"
- # not needed anymore; keep user's
- # environment clean
- unset __git_ps1_upstream_name
- fi
- fi
- fi
-
-}
-
-# Helper function that is meant to be called from __git_ps1. It
-# injects color codes into the appropriate gitstring variables used
-# to build a gitstring.
-__git_ps1_colorize_gitstring ()
-{
- if [[ -n ${ZSH_VERSION-} ]]; then
- local c_red='%F{red}'
- local c_green='%F{green}'
- local c_lblue='%F{blue}'
- local c_clear='%f'
- else
- # Using \[ and \] around colors is necessary to prevent
- # issues with command line editing/browsing/completion!
- local c_red='\[\e[31m\]'
- local c_green='\[\e[32m\]'
- local c_lblue='\[\e[1;34m\]'
- local c_clear='\[\e[0m\]'
- fi
- local bad_color=$c_red
- local ok_color=$c_green
- local flags_color="$c_lblue"
-
- local branch_color=""
- if [ $detached = no ]; then
- branch_color="$ok_color"
- else
- branch_color="$bad_color"
- fi
- c="$branch_color$c"
-
- z="$c_clear$z"
- if [ "$w" = "*" ]; then
- w="$bad_color$w"
- fi
- if [ -n "$i" ]; then
- i="$ok_color$i"
- fi
- if [ -n "$s" ]; then
- s="$flags_color$s"
- fi
- if [ -n "$u" ]; then
- u="$bad_color$u"
- fi
- r="$c_clear$r"
-}
-
-__git_eread ()
-{
- local f="$1"
- shift
- test -r "$f" && read "$@" <"$f"
-}
-
-# __git_ps1 accepts 0 or 1 arguments (i.e., format string)
-# when called from PS1 using command substitution
-# in this mode it prints text to add to bash PS1 prompt (includes branch name)
-#
-# __git_ps1 requires 2 or 3 arguments when called from PROMPT_COMMAND (pc)
-# in that case it _sets_ PS1. The arguments are parts of a PS1 string.
-# when two arguments are given, the first is prepended and the second appended
-# to the state string when assigned to PS1.
-# The optional third parameter will be used as printf format string to further
-# customize the output of the git-status string.
-# In this mode you can request colored hints using GIT_PS1_SHOWCOLORHINTS=true
-__git_ps1 ()
-{
- # preserve exit status
- local exit=$?
- local pcmode=no
- local detached=no
- local ps1pc_start='\u@\h:\w '
- local ps1pc_end='\$ '
- local printf_format=' (%s)'
-
- case "$#" in
- 2|3) pcmode=yes
- ps1pc_start="$1"
- ps1pc_end="$2"
- printf_format="${3:-$printf_format}"
- # set PS1 to a plain prompt so that we can
- # simply return early if the prompt should not
- # be decorated
- PS1="$ps1pc_start$ps1pc_end"
- ;;
- 0|1) printf_format="${1:-$printf_format}"
- ;;
- *) return $exit
- ;;
- esac
-
- # ps1_expanded: This variable is set to 'yes' if the shell
- # subjects the value of PS1 to parameter expansion:
- #
- # * bash does unless the promptvars option is disabled
- # * zsh does not unless the PROMPT_SUBST option is set
- # * POSIX shells always do
- #
- # If the shell would expand the contents of PS1 when drawing
- # the prompt, a raw ref name must not be included in PS1.
- # This protects the user from arbitrary code execution via
- # specially crafted ref names. For example, a ref named
- # 'refs/heads/$(IFS=_;cmd=sudo_rm_-rf_/;$cmd)' might cause the
- # shell to execute 'sudo rm -rf /' when the prompt is drawn.
- #
- # Instead, the ref name should be placed in a separate global
- # variable (in the __git_ps1_* namespace to avoid colliding
- # with the user's environment) and that variable should be
- # referenced from PS1. For example:
- #
- # __git_ps1_foo=$(do_something_to_get_ref_name)
- # PS1="...stuff...\${__git_ps1_foo}...stuff..."
- #
- # If the shell does not expand the contents of PS1, the raw
- # ref name must be included in PS1.
- #
- # The value of this variable is only relevant when in pcmode.
- #
- # Assume that the shell follows the POSIX specification and
- # expands PS1 unless determined otherwise. (This is more
- # likely to be correct if the user has a non-bash, non-zsh
- # shell and safer than the alternative if the assumption is
- # incorrect.)
- #
- local ps1_expanded=yes
- [ -z "$ZSH_VERSION" ] || [[ -o PROMPT_SUBST ]] || ps1_expanded=no
- [ -z "$BASH_VERSION" ] || shopt -q promptvars || ps1_expanded=no
-
- local repo_info rev_parse_exit_code
- repo_info="$(git rev-parse --git-dir --is-inside-git-dir \
- --is-bare-repository --is-inside-work-tree \
- --short HEAD 2>/dev/null)"
- rev_parse_exit_code="$?"
-
- if [ -z "$repo_info" ]; then
- return $exit
- fi
-
- local short_sha
- if [ "$rev_parse_exit_code" = "0" ]; then
- short_sha="${repo_info##*$'\n'}"
- repo_info="${repo_info%$'\n'*}"
- fi
- local inside_worktree="${repo_info##*$'\n'}"
- repo_info="${repo_info%$'\n'*}"
- local bare_repo="${repo_info##*$'\n'}"
- repo_info="${repo_info%$'\n'*}"
- local inside_gitdir="${repo_info##*$'\n'}"
- local g="${repo_info%$'\n'*}"
-
- if [ "true" = "$inside_worktree" ] &&
- [ -n "${GIT_PS1_HIDE_IF_PWD_IGNORED-}" ] &&
- [ "$(git config --bool bash.hideIfPwdIgnored)" != "false" ] &&
- git check-ignore -q .
- then
- return $exit
- fi
-
- local r=""
- local b=""
- local step=""
- local total=""
- if [ -d "$g/rebase-merge" ]; then
- __git_eread "$g/rebase-merge/head-name" b
- __git_eread "$g/rebase-merge/msgnum" step
- __git_eread "$g/rebase-merge/end" total
- if [ -f "$g/rebase-merge/interactive" ]; then
- r="|REBASE-i"
- else
- r="|REBASE-m"
- fi
- else
- if [ -d "$g/rebase-apply" ]; then
- __git_eread "$g/rebase-apply/next" step
- __git_eread "$g/rebase-apply/last" total
- if [ -f "$g/rebase-apply/rebasing" ]; then
- __git_eread "$g/rebase-apply/head-name" b
- r="|REBASE"
- elif [ -f "$g/rebase-apply/applying" ]; then
- r="|AM"
- else
- r="|AM/REBASE"
- fi
- elif [ -f "$g/MERGE_HEAD" ]; then
- r="|MERGING"
- elif [ -f "$g/CHERRY_PICK_HEAD" ]; then
- r="|CHERRY-PICKING"
- elif [ -f "$g/REVERT_HEAD" ]; then
- r="|REVERTING"
- elif [ -f "$g/BISECT_LOG" ]; then
- r="|BISECTING"
- fi
-
- if [ -n "$b" ]; then
- :
- elif [ -h "$g/HEAD" ]; then
- # symlink symbolic ref
- b="$(git symbolic-ref HEAD 2>/dev/null)"
- else
- local head=""
- if ! __git_eread "$g/HEAD" head; then
- return $exit
- fi
- # is it a symbolic ref?
- b="${head#ref: }"
- if [ "$head" = "$b" ]; then
- detached=yes
- b="$(
- case "${GIT_PS1_DESCRIBE_STYLE-}" in
- (contains)
- git describe --contains HEAD ;;
- (branch)
- git describe --contains --all HEAD ;;
- (describe)
- git describe HEAD ;;
- (* | default)
- git describe --tags --exact-match HEAD ;;
- esac 2>/dev/null)" ||
-
- b="$short_sha..."
- b="($b)"
- fi
- fi
- fi
-
- if [ -n "$step" ] && [ -n "$total" ]; then
- r="$r $step/$total"
- fi
-
- local w=""
- local i=""
- local s=""
- local u=""
- local c=""
- local p=""
-
- if [ "true" = "$inside_gitdir" ]; then
- if [ "true" = "$bare_repo" ]; then
- c="BARE:"
- else
- b="GIT_DIR!"
- fi
- elif [ "true" = "$inside_worktree" ]; then
- if [ -n "${GIT_PS1_SHOWDIRTYSTATE-}" ] &&
- [ "$(git config --bool bash.showDirtyState)" != "false" ]
- then
- git diff --no-ext-diff --quiet || w="*"
- git diff --no-ext-diff --cached --quiet || i="+"
- if [ -z "$short_sha" ] && [ -z "$i" ]; then
- i="#"
- fi
- fi
- if [ -n "${GIT_PS1_SHOWSTASHSTATE-}" ] &&
- git rev-parse --verify --quiet refs/stash >/dev/null
- then
- s="$"
- fi
-
- if [ -n "${GIT_PS1_SHOWUNTRACKEDFILES-}" ] &&
- [ "$(git config --bool bash.showUntrackedFiles)" != "false" ] &&
- git ls-files --others --exclude-standard --directory --no-empty-directory --error-unmatch -- ':/*' >/dev/null 2>/dev/null
- then
- u="%${ZSH_VERSION+%}"
- fi
-
- if [ -n "${GIT_PS1_SHOWUPSTREAM-}" ]; then
- __git_ps1_show_upstream
- fi
- fi
-
- local z="${GIT_PS1_STATESEPARATOR-" "}"
-
- # NO color option unless in PROMPT_COMMAND mode
- if [ $pcmode = yes ] && [ -n "${GIT_PS1_SHOWCOLORHINTS-}" ]; then
- __git_ps1_colorize_gitstring
- fi
-
- b=${b##refs/heads/}
- if [ $pcmode = yes ] && [ $ps1_expanded = yes ]; then
- __git_ps1_branch_name=$b
- b="\${__git_ps1_branch_name}"
- fi
-
- local f="$w$i$s$u"
- local gitstring="$c$b${f:+$z$f}$r$p"
-
- if [ $pcmode = yes ]; then
- if [ "${__git_printf_supports_v-}" != yes ]; then
- gitstring=$(printf -- "$printf_format" "$gitstring")
- else
- printf -v gitstring -- "$printf_format" "$gitstring"
- fi
- PS1="$ps1pc_start$gitstring$ps1pc_end"
- else
- printf -- "$printf_format" "$gitstring"
- fi
-
- return $exit
-}
# * `autocd`, e.g. `**/qux` will enter `./foo/bar/baz/qux`
# * Recursive globbing, e.g. `echo **/*.txt`
for option in autocd globstar; do
- shopt -s "$option" 2> /dev/null;
+ shopt -s "$option" 2> /dev/null;
done;
-# File creation
-umask 022
-
# Don't use ^D to exit
set -o ignoreeof
set -o vi
+++ /dev/null
-# Bash git prompt solarized
-
-if [[ $COLORTERM = gnome-* && $TERM = xterm ]] && infocmp gnome-256color >/dev/null 2>&1; then
- export TERM='gnome-256color';
-elif infocmp xterm-256color >/dev/null 2>&1; then
- export TERM='xterm-256color';
-fi;
-
-if tput setaf 1 &> /dev/null; then
- tput sgr0; # reset colors
- bold=$(tput bold);
- reset=$(tput sgr0);
- black=$(tput setaf 0);
- blue=$(tput setaf 33);
- cyan=$(tput setaf 37);
- green=$(tput setaf 64);
- orange=$(tput setaf 166);
- purple=$(tput setaf 125);
- red=$(tput setaf 124);
- violet=$(tput setaf 61);
- white=$(tput setaf 15);
- yellow=$(tput setaf 136);
-else
- bold='';
- reset="\e[0m";
- black="\e[1;30m";
- blue="\e[1;34m";
- cyan="\e[1;36m";
- green="\e[1;32m";
- orange="\e[1;33m";
- purple="\e[1;35m";
- red="\e[1;31m";
- violet="\e[1;35m";
- white="\e[1;37m";
- yellow="\e[1;33m";
-fi;
-
-# Highlight the user name when logged in as root.
-if [[ "${USER}" == "root" ]]; then
- userStyle="${red}";
-else
- userStyle="${orange}";
-fi;
-
-# Highlight the hostname when connected via SSH.
-if [[ "${SSH_TTY}" ]]; then
- hostStyle="${bold}${red}";
-else
- hostStyle="${yellow}";
-fi;
-
-# Enabling any of these options will slow down the prompt
-export GIT_PS1_SHOWDIRTYSTATE=1
-export GIT_PS1_SHOWSTASHSTATE=1
-export GIT_PS1_SHOWUNTRACKEDFILES=1
-export GIT_PS1_SHOWUPSTREAM=1
-
-# Set git prompt
-# Set the terminal title to the current working directory.
-PS1='\[\033]0;\w\007\]';
-PS1+='\[${bold}\]';
-PS1+='\r'; # newline
-PS1+='\[${userStyle}\]\u '; # username
-PS1+='\[${white}\]at ';
-PS1+='\[${hostStyle}\]\h '; # at host
-PS1+='\[${white}\]in ';
-PS1+='\[${green}\]\w '; # in working directory
-PS1+="$(__git_ps1 '\[${white}\]on \[${violet}\]%s\[${blue}\]')"; # on branch
-PS1+='\n'; # newline
-PS1+='\[${white}\]\$ '; # `$`
-PS1+='\[${reset}\]'; # reset color
-export PS1;
-
-PS2='\[${yellow}\]→ '; # `→`
-PS2+='\[${reset}\]'; # reset color
-export PS2;
--- /dev/null
+export USERNAME=$LOGNAME
+export HOSTNAME=`hostname`
+#echo Welcome $USERNAME. You are on Server: $HOSTNAME !!!
+
+# Set defaults
+export SHELL=bash
+export EDITOR=vim;
+export VISUAL=vim;
+export PAGER=less
+#export MYVIMRC="$HOME/.config/vim/vimrc"
+
+# Larger bash history (allow 32³ entries; default is 500)
+export HISTSIZE=32768;
+export HISTFILESIZE=$HISTSIZE;
+export HISTCONTROL=ignoreboth;
+# Make some commands not show up in history
+export HISTIGNORE="ls:cd:cd -:pwd:exit:date:* --help";
+export HISTFILE="$HOME/.cache/bash/history";
+
+# Whenever displaying the prompt, write the previous line to disk
+export PROMPT_COMMAND="history -a";
+# Prefer US English and use UTF-8
+# export LANG=$(locale -uU)
+export LANG="en_US.UTF-8";
+export LC_ALL="en_US.UTF-8";
+
+# Highlight section titles in manual pages
+export LESS_TERMCAP_md="${yellow}";
+
+# Don’t clear the screen after quitting a manual page
+export MANPAGER="less -X";
+
+# Always enable colored `grep` output
+#export GREP_OPTIONS="--color=auto";
+
+# Set up syntax highlighting for 'less' (requires source-highlight package)
+# See http://www.gnu.org/software/src-highlite/source-highlight.html
+# export LESSOPEN="| /usr/bin/src-hilite-lesspipe.sh %s"
+export LESS=-eFRX
+
+# Tell lynx where the color settings are that were adjusted for the
+# Solarized color scheme
+export LYNX_LSS=$HOME/.config/lynx.lss
+
+++ /dev/null
-
-# Make vim the default editor
-export EDITOR="vim";
-export VISUAL="vim";
-#export MYVIMRC="$HOME/.config/vim/vimrc"
-
-# Larger bash history (allow 32³ entries; default is 500)
-export HISTSIZE=32768;
-export HISTFILESIZE=$HISTSIZE;
-export HISTCONTROL=ignoreboth;
-# Make some commands not show up in history
-export HISTIGNORE="ls:cd:cd -:pwd:exit:date:* --help";
-export HISTFILE="$HOME/.cache/bash/history";
-# Whenever displaying the prompt, write the previous line to disk
-export PROMPT_COMMAND="history -a";
-
-# Prefer US English and use UTF-8
-# export LANG=$(locale -uU)
-export LANG="en_US.UTF-8";
-export LC_ALL="en_US.UTF-8";
-
-# Highlight section titles in manual pages
-export LESS_TERMCAP_md="${yellow}";
-
-# Don’t clear the screen after quitting a manual page
-export MANPAGER="less -X";
-
-# Always enable colored `grep` output
-#export GREP_OPTIONS="--color=auto";
-
-# Set up syntax highlighting for 'less' (requires source-highlight package)
-# See http://www.gnu.org/software/src-highlite/source-highlight.html
-# export LESSOPEN="| /usr/bin/src-hilite-lesspipe.sh %s"
-export LESS=-eFRX
-
-# Tell lynx where the color settings are that were adjusted for the
-# Solarized color scheme
-export LYNX_LSS=$HOME/.config/lynx.lss
-
--- /dev/null
+# bash/zsh git prompt support
+#
+# Copyright (C) 2006,2007 Shawn O. Pearce <spearce@spearce.org>
+# Distributed under the GNU General Public License, version 2.0.
+#
+# This script allows you to see repository status in your prompt.
+#
+# To enable:
+#
+# 1) Copy this file to somewhere (e.g. ~/.git-prompt.sh).
+# 2) Add the following line to your .bashrc/.zshrc:
+# source ~/.git-prompt.sh
+# 3a) Change your PS1 to call __git_ps1 as
+# command-substitution:
+# Bash: PS1='[\u@\h \W$(__git_ps1 " (%s)")]\$ '
+# ZSH: setopt PROMPT_SUBST ; PS1='[%n@%m %c$(__git_ps1 " (%s)")]\$ '
+# the optional argument will be used as format string.
+# 3b) Alternatively, for a slightly faster prompt, __git_ps1 can
+# be used for PROMPT_COMMAND in Bash or for precmd() in Zsh
+# with two parameters, <pre> and <post>, which are strings
+# you would put in $PS1 before and after the status string
+# generated by the git-prompt machinery. e.g.
+# Bash: PROMPT_COMMAND='__git_ps1 "\u@\h:\w" "\\\$ "'
+# will show username, at-sign, host, colon, cwd, then
+# various status string, followed by dollar and SP, as
+# your prompt.
+# ZSH: precmd () { __git_ps1 "%n" ":%~$ " "|%s" }
+# will show username, pipe, then various status string,
+# followed by colon, cwd, dollar and SP, as your prompt.
+# Optionally, you can supply a third argument with a printf
+# format string to finetune the output of the branch status
+#
+# The repository status will be displayed only if you are currently in a
+# git repository. The %s token is the placeholder for the shown status.
+#
+# The prompt status always includes the current branch name.
+#
+# In addition, if you set GIT_PS1_SHOWDIRTYSTATE to a nonempty value,
+# unstaged (*) and staged (+) changes will be shown next to the branch
+# name. You can configure this per-repository with the
+# bash.showDirtyState variable, which defaults to true once
+# GIT_PS1_SHOWDIRTYSTATE is enabled.
+#
+# You can also see if currently something is stashed, by setting
+# GIT_PS1_SHOWSTASHSTATE to a nonempty value. If something is stashed,
+# then a '$' will be shown next to the branch name.
+#
+# If you would like to see if there're untracked files, then you can set
+# GIT_PS1_SHOWUNTRACKEDFILES to a nonempty value. If there're untracked
+# files, then a '%' will be shown next to the branch name. You can
+# configure this per-repository with the bash.showUntrackedFiles
+# variable, which defaults to true once GIT_PS1_SHOWUNTRACKEDFILES is
+# enabled.
+#
+# If you would like to see the difference between HEAD and its upstream,
+# set GIT_PS1_SHOWUPSTREAM="auto". A "<" indicates you are behind, ">"
+# indicates you are ahead, "<>" indicates you have diverged and "="
+# indicates that there is no difference. You can further control
+# behaviour by setting GIT_PS1_SHOWUPSTREAM to a space-separated list
+# of values:
+#
+# verbose show number of commits ahead/behind (+/-) upstream
+# name if verbose, then also show the upstream abbrev name
+# legacy don't use the '--count' option available in recent
+# versions of git-rev-list
+# git always compare HEAD to @{upstream}
+# svn always compare HEAD to your SVN upstream
+#
+# You can change the separator between the branch name and the above
+# state symbols by setting GIT_PS1_STATESEPARATOR. The default separator
+# is SP.
+#
+# By default, __git_ps1 will compare HEAD to your SVN upstream if it can
+# find one, or @{upstream} otherwise. Once you have set
+# GIT_PS1_SHOWUPSTREAM, you can override it on a per-repository basis by
+# setting the bash.showUpstream config variable.
+#
+# If you would like to see more information about the identity of
+# commits checked out as a detached HEAD, set GIT_PS1_DESCRIBE_STYLE
+# to one of these values:
+#
+# contains relative to newer annotated tag (v1.6.3.2~35)
+# branch relative to newer tag or branch (master~4)
+# describe relative to older annotated tag (v1.6.3.1-13-gdd42c2f)
+# default exactly matching tag
+#
+# If you would like a colored hint about the current dirty state, set
+# GIT_PS1_SHOWCOLORHINTS to a nonempty value. The colors are based on
+# the colored output of "git status -sb" and are available only when
+# using __git_ps1 for PROMPT_COMMAND or precmd.
+#
+# If you would like __git_ps1 to do nothing in the case when the current
+# directory is set up to be ignored by git, then set
+# GIT_PS1_HIDE_IF_PWD_IGNORED to a nonempty value. Override this on the
+# repository level by setting bash.hideIfPwdIgnored to "false".
+
+# check whether printf supports -v
+__git_printf_supports_v=
+printf -v __git_printf_supports_v -- '%s' yes >/dev/null 2>&1
+
+# stores the divergence from upstream in $p
+# used by GIT_PS1_SHOWUPSTREAM
+__git_ps1_show_upstream ()
+{
+ local key value
+ local svn_remote svn_url_pattern count n
+ local upstream=git legacy="" verbose="" name=""
+
+ svn_remote=()
+ # get some config options from git-config
+ local output="$(git config -z --get-regexp '^(svn-remote\..*\.url|bash\.showupstream)$' 2>/dev/null | tr '\0\n' '\n ')"
+ while read -r key value; do
+ case "$key" in
+ bash.showupstream)
+ GIT_PS1_SHOWUPSTREAM="$value"
+ if [[ -z "${GIT_PS1_SHOWUPSTREAM}" ]]; then
+ p=""
+ return
+ fi
+ ;;
+ svn-remote.*.url)
+ svn_remote[$((${#svn_remote[@]} + 1))]="$value"
+ svn_url_pattern="$svn_url_pattern\\|$value"
+ upstream=svn+git # default upstream is SVN if available, else git
+ ;;
+ esac
+ done <<< "$output"
+
+ # parse configuration values
+ for option in ${GIT_PS1_SHOWUPSTREAM}; do
+ case "$option" in
+ git|svn) upstream="$option" ;;
+ verbose) verbose=1 ;;
+ legacy) legacy=1 ;;
+ name) name=1 ;;
+ esac
+ done
+
+ # Find our upstream
+ case "$upstream" in
+ git) upstream="@{upstream}" ;;
+ svn*)
+ # get the upstream from the "git-svn-id: ..." in a commit message
+ # (git-svn uses essentially the same procedure internally)
+ local -a svn_upstream
+ svn_upstream=($(git log --first-parent -1 \
+ --grep="^git-svn-id: \(${svn_url_pattern#??}\)" 2>/dev/null))
+ if [[ 0 -ne ${#svn_upstream[@]} ]]; then
+ svn_upstream=${svn_upstream[${#svn_upstream[@]} - 2]}
+ svn_upstream=${svn_upstream%@*}
+ local n_stop="${#svn_remote[@]}"
+ for ((n=1; n <= n_stop; n++)); do
+ svn_upstream=${svn_upstream#${svn_remote[$n]}}
+ done
+
+ if [[ -z "$svn_upstream" ]]; then
+ # default branch name for checkouts with no layout:
+ upstream=${GIT_SVN_ID:-git-svn}
+ else
+ upstream=${svn_upstream#/}
+ fi
+ elif [[ "svn+git" = "$upstream" ]]; then
+ upstream="@{upstream}"
+ fi
+ ;;
+ esac
+
+ # Find how many commits we are ahead/behind our upstream
+ if [[ -z "$legacy" ]]; then
+ count="$(git rev-list --count --left-right \
+ "$upstream"...HEAD 2>/dev/null)"
+ else
+ # produce equivalent output to --count for older versions of git
+ local commits
+ if commits="$(git rev-list --left-right "$upstream"...HEAD 2>/dev/null)"
+ then
+ local commit behind=0 ahead=0
+ for commit in $commits
+ do
+ case "$commit" in
+ "<"*) ((behind++)) ;;
+ *) ((ahead++)) ;;
+ esac
+ done
+ count="$behind $ahead"
+ else
+ count=""
+ fi
+ fi
+
+ # calculate the result
+ if [[ -z "$verbose" ]]; then
+ case "$count" in
+ "") # no upstream
+ p="" ;;
+ "0 0") # equal to upstream
+ p="=" ;;
+ "0 "*) # ahead of upstream
+ p=">" ;;
+ *" 0") # behind upstream
+ p="<" ;;
+ *) # diverged from upstream
+ p="<>" ;;
+ esac
+ else
+ case "$count" in
+ "") # no upstream
+ p="" ;;
+ "0 0") # equal to upstream
+ p=" u=" ;;
+ "0 "*) # ahead of upstream
+ p=" u+${count#0 }" ;;
+ *" 0") # behind upstream
+ p=" u-${count% 0}" ;;
+ *) # diverged from upstream
+ p=" u+${count#* }-${count% *}" ;;
+ esac
+ if [[ -n "$count" && -n "$name" ]]; then
+ __git_ps1_upstream_name=$(git rev-parse \
+ --abbrev-ref "$upstream" 2>/dev/null)
+ if [ $pcmode = yes ] && [ $ps1_expanded = yes ]; then
+ p="$p \${__git_ps1_upstream_name}"
+ else
+ p="$p ${__git_ps1_upstream_name}"
+ # not needed anymore; keep user's
+ # environment clean
+ unset __git_ps1_upstream_name
+ fi
+ fi
+ fi
+
+}
+
+# Helper function that is meant to be called from __git_ps1. It
+# injects color codes into the appropriate gitstring variables used
+# to build a gitstring.
+__git_ps1_colorize_gitstring ()
+{
+ if [[ -n ${ZSH_VERSION-} ]]; then
+ local c_red='%F{red}'
+ local c_green='%F{green}'
+ local c_lblue='%F{blue}'
+ local c_clear='%f'
+ else
+ # Using \[ and \] around colors is necessary to prevent
+ # issues with command line editing/browsing/completion!
+ local c_red='\[\e[31m\]'
+ local c_green='\[\e[32m\]'
+ local c_lblue='\[\e[1;34m\]'
+ local c_clear='\[\e[0m\]'
+ fi
+ local bad_color=$c_red
+ local ok_color=$c_green
+ local flags_color="$c_lblue"
+
+ local branch_color=""
+ if [ $detached = no ]; then
+ branch_color="$ok_color"
+ else
+ branch_color="$bad_color"
+ fi
+ c="$branch_color$c"
+
+ z="$c_clear$z"
+ if [ "$w" = "*" ]; then
+ w="$bad_color$w"
+ fi
+ if [ -n "$i" ]; then
+ i="$ok_color$i"
+ fi
+ if [ -n "$s" ]; then
+ s="$flags_color$s"
+ fi
+ if [ -n "$u" ]; then
+ u="$bad_color$u"
+ fi
+ r="$c_clear$r"
+}
+
+__git_eread ()
+{
+ local f="$1"
+ shift
+ test -r "$f" && read "$@" <"$f"
+}
+
+# __git_ps1 accepts 0 or 1 arguments (i.e., format string)
+# when called from PS1 using command substitution
+# in this mode it prints text to add to bash PS1 prompt (includes branch name)
+#
+# __git_ps1 requires 2 or 3 arguments when called from PROMPT_COMMAND (pc)
+# in that case it _sets_ PS1. The arguments are parts of a PS1 string.
+# when two arguments are given, the first is prepended and the second appended
+# to the state string when assigned to PS1.
+# The optional third parameter will be used as printf format string to further
+# customize the output of the git-status string.
+# In this mode you can request colored hints using GIT_PS1_SHOWCOLORHINTS=true
+__git_ps1 ()
+{
+ # preserve exit status
+ local exit=$?
+ local pcmode=no
+ local detached=no
+ local ps1pc_start='\u@\h:\w '
+ local ps1pc_end='\$ '
+ local printf_format=' (%s)'
+
+ case "$#" in
+ 2|3) pcmode=yes
+ ps1pc_start="$1"
+ ps1pc_end="$2"
+ printf_format="${3:-$printf_format}"
+ # set PS1 to a plain prompt so that we can
+ # simply return early if the prompt should not
+ # be decorated
+ PS1="$ps1pc_start$ps1pc_end"
+ ;;
+ 0|1) printf_format="${1:-$printf_format}"
+ ;;
+ *) return $exit
+ ;;
+ esac
+
+ # ps1_expanded: This variable is set to 'yes' if the shell
+ # subjects the value of PS1 to parameter expansion:
+ #
+ # * bash does unless the promptvars option is disabled
+ # * zsh does not unless the PROMPT_SUBST option is set
+ # * POSIX shells always do
+ #
+ # If the shell would expand the contents of PS1 when drawing
+ # the prompt, a raw ref name must not be included in PS1.
+ # This protects the user from arbitrary code execution via
+ # specially crafted ref names. For example, a ref named
+ # 'refs/heads/$(IFS=_;cmd=sudo_rm_-rf_/;$cmd)' might cause the
+ # shell to execute 'sudo rm -rf /' when the prompt is drawn.
+ #
+ # Instead, the ref name should be placed in a separate global
+ # variable (in the __git_ps1_* namespace to avoid colliding
+ # with the user's environment) and that variable should be
+ # referenced from PS1. For example:
+ #
+ # __git_ps1_foo=$(do_something_to_get_ref_name)
+ # PS1="...stuff...\${__git_ps1_foo}...stuff..."
+ #
+ # If the shell does not expand the contents of PS1, the raw
+ # ref name must be included in PS1.
+ #
+ # The value of this variable is only relevant when in pcmode.
+ #
+ # Assume that the shell follows the POSIX specification and
+ # expands PS1 unless determined otherwise. (This is more
+ # likely to be correct if the user has a non-bash, non-zsh
+ # shell and safer than the alternative if the assumption is
+ # incorrect.)
+ #
+ local ps1_expanded=yes
+ [ -z "$ZSH_VERSION" ] || [[ -o PROMPT_SUBST ]] || ps1_expanded=no
+ [ -z "$BASH_VERSION" ] || shopt -q promptvars || ps1_expanded=no
+
+ local repo_info rev_parse_exit_code
+ repo_info="$(git rev-parse --git-dir --is-inside-git-dir \
+ --is-bare-repository --is-inside-work-tree \
+ --short HEAD 2>/dev/null)"
+ rev_parse_exit_code="$?"
+
+ if [ -z "$repo_info" ]; then
+ return $exit
+ fi
+
+ local short_sha
+ if [ "$rev_parse_exit_code" = "0" ]; then
+ short_sha="${repo_info##*$'\n'}"
+ repo_info="${repo_info%$'\n'*}"
+ fi
+ local inside_worktree="${repo_info##*$'\n'}"
+ repo_info="${repo_info%$'\n'*}"
+ local bare_repo="${repo_info##*$'\n'}"
+ repo_info="${repo_info%$'\n'*}"
+ local inside_gitdir="${repo_info##*$'\n'}"
+ local g="${repo_info%$'\n'*}"
+
+ if [ "true" = "$inside_worktree" ] &&
+ [ -n "${GIT_PS1_HIDE_IF_PWD_IGNORED-}" ] &&
+ [ "$(git config --bool bash.hideIfPwdIgnored)" != "false" ] &&
+ git check-ignore -q .
+ then
+ return $exit
+ fi
+
+ local r=""
+ local b=""
+ local step=""
+ local total=""
+ if [ -d "$g/rebase-merge" ]; then
+ __git_eread "$g/rebase-merge/head-name" b
+ __git_eread "$g/rebase-merge/msgnum" step
+ __git_eread "$g/rebase-merge/end" total
+ if [ -f "$g/rebase-merge/interactive" ]; then
+ r="|REBASE-i"
+ else
+ r="|REBASE-m"
+ fi
+ else
+ if [ -d "$g/rebase-apply" ]; then
+ __git_eread "$g/rebase-apply/next" step
+ __git_eread "$g/rebase-apply/last" total
+ if [ -f "$g/rebase-apply/rebasing" ]; then
+ __git_eread "$g/rebase-apply/head-name" b
+ r="|REBASE"
+ elif [ -f "$g/rebase-apply/applying" ]; then
+ r="|AM"
+ else
+ r="|AM/REBASE"
+ fi
+ elif [ -f "$g/MERGE_HEAD" ]; then
+ r="|MERGING"
+ elif [ -f "$g/CHERRY_PICK_HEAD" ]; then
+ r="|CHERRY-PICKING"
+ elif [ -f "$g/REVERT_HEAD" ]; then
+ r="|REVERTING"
+ elif [ -f "$g/BISECT_LOG" ]; then
+ r="|BISECTING"
+ fi
+
+ if [ -n "$b" ]; then
+ :
+ elif [ -h "$g/HEAD" ]; then
+ # symlink symbolic ref
+ b="$(git symbolic-ref HEAD 2>/dev/null)"
+ else
+ local head=""
+ if ! __git_eread "$g/HEAD" head; then
+ return $exit
+ fi
+ # is it a symbolic ref?
+ b="${head#ref: }"
+ if [ "$head" = "$b" ]; then
+ detached=yes
+ b="$(
+ case "${GIT_PS1_DESCRIBE_STYLE-}" in
+ (contains)
+ git describe --contains HEAD ;;
+ (branch)
+ git describe --contains --all HEAD ;;
+ (describe)
+ git describe HEAD ;;
+ (* | default)
+ git describe --tags --exact-match HEAD ;;
+ esac 2>/dev/null)" ||
+
+ b="$short_sha..."
+ b="($b)"
+ fi
+ fi
+ fi
+
+ if [ -n "$step" ] && [ -n "$total" ]; then
+ r="$r $step/$total"
+ fi
+
+ local w=""
+ local i=""
+ local s=""
+ local u=""
+ local c=""
+ local p=""
+
+ if [ "true" = "$inside_gitdir" ]; then
+ if [ "true" = "$bare_repo" ]; then
+ c="BARE:"
+ else
+ b="GIT_DIR!"
+ fi
+ elif [ "true" = "$inside_worktree" ]; then
+ if [ -n "${GIT_PS1_SHOWDIRTYSTATE-}" ] &&
+ [ "$(git config --bool bash.showDirtyState)" != "false" ]
+ then
+ git diff --no-ext-diff --quiet || w="*"
+ git diff --no-ext-diff --cached --quiet || i="+"
+ if [ -z "$short_sha" ] && [ -z "$i" ]; then
+ i="#"
+ fi
+ fi
+ if [ -n "${GIT_PS1_SHOWSTASHSTATE-}" ] &&
+ git rev-parse --verify --quiet refs/stash >/dev/null
+ then
+ s="$"
+ fi
+
+ if [ -n "${GIT_PS1_SHOWUNTRACKEDFILES-}" ] &&
+ [ "$(git config --bool bash.showUntrackedFiles)" != "false" ] &&
+ git ls-files --others --exclude-standard --directory --no-empty-directory --error-unmatch -- ':/*' >/dev/null 2>/dev/null
+ then
+ u="%${ZSH_VERSION+%}"
+ fi
+
+ if [ -n "${GIT_PS1_SHOWUPSTREAM-}" ]; then
+ __git_ps1_show_upstream
+ fi
+ fi
+
+ local z="${GIT_PS1_STATESEPARATOR-" "}"
+
+ # NO color option unless in PROMPT_COMMAND mode
+ if [ $pcmode = yes ] && [ -n "${GIT_PS1_SHOWCOLORHINTS-}" ]; then
+ __git_ps1_colorize_gitstring
+ fi
+
+ b=${b##refs/heads/}
+ if [ $pcmode = yes ] && [ $ps1_expanded = yes ]; then
+ __git_ps1_branch_name=$b
+ b="\${__git_ps1_branch_name}"
+ fi
+
+ local f="$w$i$s$u"
+ local gitstring="$c$b${f:+$z$f}$r$p"
+
+ if [ $pcmode = yes ]; then
+ if [ "${__git_printf_supports_v-}" != yes ]; then
+ gitstring=$(printf -- "$printf_format" "$gitstring")
+ else
+ printf -v gitstring -- "$printf_format" "$gitstring"
+ fi
+ PS1="$ps1pc_start$gitstring$ps1pc_end"
+ else
+ printf -- "$printf_format" "$gitstring"
+ fi
+
+ return $exit
+}
+++ /dev/null
-
-# Set PATH so it includes user's private bin if it exists
-if [ -d "${HOME}/bin" ] ; then
- PATH="${HOME}/bin:${PATH}"
-fi
-
-# Set MANPATH so it includes users' private man if it exists
-if [ -d "${HOME}/man" ]; then
- MANPATH="${HOME}/man:${MANPATH}"
-fi
-
-# Set INFOPATH so it includes users' private info if it exists
-if [ -d "${HOME}/info" ]; then
- INFOPATH="${HOME}/info:${INFOPATH}"
-fi
-
-# Set PATH to temporary folders
-export TEMPDIR="${HOME}/tmp"
-export TMPDIR="${HOME}/tmp"
-
-# Set PATH to PREFIX folders
-export PREFIX="${HOME}"
-
-# Add local libraries to libpath
-# LD_LIBRARY_PATH="${PREFIX}/lib:${LD_LIBRARY_PATH}"
--- /dev/null
+
+# Set PATH so it includes user's private bin if it exists
+if [ -d "${HOME}/bin" ] ; then
+ PATH=.:${HOME}/bin:${PATH}
+fi
+
+# Set MANPATH so it includes users' private man if it exists
+if [ -d "${HOME}/man" ]; then
+ MANPATH="${HOME}/man:${MANPATH}"
+fi
+
+# Set INFOPATH so it includes users' private info if it exists
+if [ -d "${HOME}/info" ]; then
+ INFOPATH="${HOME}/info:${INFOPATH}"
+fi
+
+# Set PATH to temporary folders
+export TEMPDIR="${HOME}/tmp"
+export TMPDIR="${HOME}/tmp"
+
+# Set PATH to PREFIX folders
+export PREFIX="${HOME}"
+
+# Add local libraries to libpath
+# LD_LIBRARY_PATH="${PREFIX}/lib:${LD_LIBRARY_PATH}"
--- /dev/null
+# Bash git prompt solarized
+
+if [[ $COLORTERM = gnome-* && $TERM = xterm ]] && infocmp gnome-256color >/dev/null 2>&1; then
+ export TERM='gnome-256color';
+elif infocmp xterm-256color >/dev/null 2>&1; then
+ export TERM='xterm-256color';
+fi;
+
+if tput setaf 1 &> /dev/null; then
+ tput sgr0; # reset colors
+ bold=$(tput bold);
+ reset=$(tput sgr0);
+ black=$(tput setaf 0);
+ blue=$(tput setaf 33);
+ cyan=$(tput setaf 37);
+ green=$(tput setaf 64);
+ orange=$(tput setaf 166);
+ purple=$(tput setaf 125);
+ red=$(tput setaf 124);
+ violet=$(tput setaf 61);
+ white=$(tput setaf 15);
+ yellow=$(tput setaf 136);
+else
+ bold='';
+ reset="\e[0m";
+ black="\e[1;30m";
+ blue="\e[1;34m";
+ cyan="\e[1;36m";
+ green="\e[1;32m";
+ orange="\e[1;33m";
+ purple="\e[1;35m";
+ red="\e[1;31m";
+ violet="\e[1;35m";
+ white="\e[1;37m";
+ yellow="\e[1;33m";
+fi;
+
+# Highlight the user name when logged in as root.
+if [[ "${USER}" == "root" ]]; then
+ userStyle="${red}";
+else
+ userStyle="${orange}";
+fi;
+
+# Highlight the hostname when connected via SSH.
+if [[ "${SSH_TTY}" ]]; then
+ hostStyle="${bold}${red}";
+else
+ hostStyle="${yellow}";
+fi;
+
+# Enabling any of these options will slow down the prompt
+export GIT_PS1_SHOWDIRTYSTATE=1
+export GIT_PS1_SHOWSTASHSTATE=1
+export GIT_PS1_SHOWUNTRACKEDFILES=1
+export GIT_PS1_SHOWUPSTREAM=1
+
+# Set git prompt
+# Set the terminal title to the current working directory.
+PS1='\[\033]0;\w\007\]';
+PS1+='\[${bold}\]';
+PS1+='\r'; # newline
+PS1+='\[${userStyle}\]\u '; # username
+PS1+='\[${white}\]at ';
+PS1+='\[${hostStyle}\]\h '; # at host
+PS1+='\[${white}\]in ';
+PS1+='\[${green}\]\w '; # in working directory
+PS1+="$(__git_ps1 '\[${white}\]on \[${violet}\]%s\[${blue}\]')"; # on branch
+PS1+='\n'; # newline
+PS1+='\[${white}\]\$ '; # `$`
+PS1+='\[${reset}\]'; # reset color
+export PS1;
+
+PS2='\[${yellow}\]→ '; # `→`
+PS2+='\[${reset}\]'; # reset color
+export PS2;
# This file is not read by bash(1) if ~/.bash_profile or ~/.bash_login
# exists.
-# Run scripts
-for file in ${HOME}/.config/profile/rc/*; do
- [ -f "$file" ] && source "$file";
-done;
+#[ -f /etc/profile ] && source /etc/profile
+
+# the default umask is set in /etc/profile;
+umask 022
# if running bash
if [ -n "${BASH_VERSION}" ]; then
- # source the users bashrc if it exists
[ -f "${HOME}/.bashrc" ] && source "${HOME}/.bashrc"
fi
+# set path, environment, prompt etc
+for file in ${HOME}/.config/profile/rc/*; do
+ [ -f "$file" ] && source "$file";
+done;